Rules: The final product must be activated by a 110 volt
switch, plugged into a power strip. The motor can not be over three
inches in diameter, measured on the outside of the case. The entire
machine must be no larger than 12" X 12" X 18". NOTHING can extend
out from this space. The monorails will be 2" X 8" dimensional
lumber; two at ten feet long. You will start in the middle of your rail,
attached to your opponent by a nylon strap. The two rails will straddle
a six foot deep hole. Your goal is to pull the other team into the
hole!!! The machine must not extend more than six inches down from
the top edge of the rail. GOOD LUCK! (All five teams finished
and competed.)
Could this be Jimi Hendrix? (Extra points for costumes...)
